Hardfacing wire LZ650
views:10372
CLASSIFICATION
EN14700 DIN 8555
T Fe 15 MF 10-65-G
CHARACTERISTICS
LZ650 is open arc flux cored wire, deposit metal is martensitic chromium carbide alloy, hardness can reach to 63HRC at single layer, weld metal thickness should be limited in 4mm.
APPLICATION
Wear plate, vcrusher cones and mantles, coal grinding roller and table, concrete mix parts, scrapers, liner plate, shovel bucket, fan blades, pumps, concrete mix parts etc
TYPICAL ALL WELD METAL ANALYSIS
|
C |
Mn |
Si |
Cr |
Fe |
|
5.5 |
0.8 |
0.6 |
26.0 |
Bal. |
Hardness: 58-65HRC Recovery: over 90% Welding Position: Flat
PARAMETER
|
Diameter |
Voltage |
Amps |
|
2.4mm |
28-31V |
300-400A |
|
2.8mm |
28-32V |
350-450A |
PACKING
2.4/2.8mm 25kg/Coil, 50kg/Coil, 250kg/Drum