Hardfacing wire LZ601
views:70534
CLASSIFICATION
EN14700 DIN 8555
T Fe 15 MF 10-60-G
CHARACTERISTICS
LZ601 is open arc flux cored wire, it is used for hardfacing components subject to extremely severe abrasive wear and moderate impact. All weld metal hardness is over 60HRC, Relief checking is normal.
APPLICATION
Wear pipe, crusher cones and mantles, shovel bucket, fan blades, pumps, concrete mix parts, scrapers, etc, liner plate, shovel bucket, fan blades, pumps, concrete mix parts, scrapers, etc
TYPICAL ALL WELD METAL ANALYSIS
|
C |
Mn |
Si |
Cr |
Fe |
|
4.5 |
1.0 |
1.0 |
26.0 |
Bal. |
Hardness: 55-63HRC Recovery: over 90% Welding Position: Flat
PARAMETER
|
Diameter |
Voltage |
Amps |
|
1.6mm |
25-29V |
200-300A |
|
2.0mm |
27-31V |
250-350A |
|
2.4mm |
28-31V |
300-400A |
|
2.8mm |
28-32V |
350-450A |
PACKING
1.6mm: 15kg/spool (1.6mm)
Over 2.0mm: 25kg/Coil, 50kg/Coil, 250kg/Drum