Hardfacing wire LZ602
views:43476
CLASSIFICATION
EN14700 DIN 8555
T Fe 15 MF 10-60-G
CHARACTERISTICS
LZ602 is C-Cr-Nb alloyed open arc flux cored wire, its hard complex carbides in tought matrix and outstanding performs in abrasion resistance. Usually used for hardfacing components withstanding severe abrasive mineral wear by sand, earth, or other abrasives, relief checking is normal.
APPLICATION
Mixer paddles, coal grinding roller and grinding paths, wear plate, band transfers, chutes, hoppers, cement and concrete pumps, cement vertical mill roller.
TYPICAL ALL WELD METAL ANALYSIS
|
C |
Mn |
Si |
Cr |
Nb |
Fe |
|
4.6 |
1.0 |
1.0 |
22.0 |
6.0 |
Bal. |
Hardness: 55-62HRC Recovery: over 90% Welding Position: Flat
PARAMETER
|
Diameter |
Voltage |
Amps |
|
1.6mm |
25-29V |
200-300A |
|
2.0mm |
27-31V |
250-350A |
|
2.4mm |
28-31V |
300-400A |
|
2.8mm |
28-32V |
350-450A |
PACKING
1.6mm: 15kg/spool (1.6mm)
Over 2.0mm: 25kg/Coil, 50kg/Coil, 250kg/Drum